Saturday, June 11, 2011

WHIRLPOOL WASHING MACHINE Model AWM6100 ERROR CODE


FAILURE DURING NORMAL OPERATION
If a failure is detected during normal operation, the machine will stop, the programme sequence
LED where the failure occurred will flash and the speed indicator LED's will illuminate in a
pattern to indicate the fault code.

Fault = 1
Detected Malfunction = Water not entering or not detected
Perform the following = Check tap, cold inlet valve, pressure switch

Fault = 3
Detected Malfunction = Drain failure or not detecting empty drum
Perform the following = Check pressure switch, blocked drain, drain pump

Fault = 5
Detected Malfunction = NTC failure
Perform the following = Check NTC

Fault = 6
Detected Malfunction = Tachometer failure (no motor movement detected)
Perform the following = Check motor

Fault = 7
Detected Malfunction = Circuit board failure (motor triac)
Perform the following = Replace timer

Fault = 9
Detected Malfunction = Drain failure
Perform the following = Check drain pump, pressure switch, blocked drain

Fault = 11
Detected Malfunction = Electronic failure
Perform the following = Replace timer

Fault = 14
Detected Malfunction = Electronic failure
Perform the following = Replace timer

Fault = 16
Detected Malfunction = Control failure
Perform the following = Replace timer

Fault = 18
Detected Malfunction = Control failure
Perform the following = Replace timer

Fault = 20
Detected Malfunction = Control failure
Perform the following = Replace timer

Fault = 21
Detected Malfunction = Control failure
Perform the following = Replace timer

Service manual download here
Kindly Bookmark this Post using your favorite Bookmarking service:
Technorati Digg This Stumble Stumble Facebook Twitter
YOUR ADSENSE CODE GOES HERE

2 komentar:

Chandran C on July 23, 2021 at 5:30 AM said...

This is really a useful post for the consumer and also for the people in the service field. As per my experience washing machines are easy to service unlike other home appliances. The issues and the solutions mentioned in the post is really helpful. I have worked in samsung service center and it was good to read.

Raj Kumar on August 19, 2021 at 3:24 AM said...

Washing machine not draining can be due to sensor issue or inner mechanism. It is not a major service issue and can be solved easily. I am a technician and have done a lot of whirlpool washing machine service. Posts such as these help quite a lot for upgrading ourselves.

Post a Comment

 

| Code Error Washing Machine © 2014. All Rights Reserved | Template Style by My Blogger Tricks .com | Design by Brian Gardner | Back To Top |