LG Washing Machine WD-1(0~9)ND(K)/TD(K)/FD(K) Error Code

If you press the [Start/Pause] button when an error in displayed, any error except S/W ERROR will
disappear and the machine will change into pause status.
In case of "PE, tE and dE" if the error is not resolved within 15 sec. In case of other errors, if the
error is not resolved within 4 min.
Power will be turned off automatically and the error only will be blinked.
But in the case of "FE", power will not be turned off.

ERROR = Water inlet error
SYMTOM = IE
CAUSE = Water has not reached to the pre-set level within 4 min. since valve operated, or water has not reached to the normal level within 25 min.

ERROR = Imbalance error
SYMTOM = UE
CAUSE = 1. The appliance is tilted. 2. Laundry is gathered to one side. 3. Non distributable things are put into the drum


ERROR = DRAIN ERROR
SYMTOM = 0E
CAUSE = Water has not drained enough within 8 min.

ERROR = OVERFLOW ERROR
SYMTOM = FE
CAUSE = Water is automatically being pumped out because too much water is in the tub

ERROR = SENSOR PRESSURE S/W ERROR
SYMTOM = PE
CAUSE = The sensor pressure switch is out of order.

ERROR = DOOR OPEN ERROR
SYMTOM = dE
CAUSE = The (Start/Pause) button is pressed with the door open. The door switch is out of order.

ERROR = HEATING ERROR
SYMTOM = tE
CAUSE = The thermistor is out of order.

ERROR = CURRENT ERROR
SYMTOM = CE
CAUSE = PWB ASSEMBLY (Main) is out of order, Replace the PWB assembly (Main)
Winding in the MOTOR is short-circuited. Replace the MOTOR

ERROR = LOCK ERROR
SYMTOM = LE
CAUSE = The Connector (3-pin, male, white) in the wire harness is not connected to the Connector (3-pin, female, white) of MOTOR. Reconnect or repair the connector
The electric contact between the connectors [ 3-pin, male, white in
the wire harness and 6-pin, female, white in the PWB ASSEMBLY
(Main) ] is bad or unstable. Reconnect or repair the contact in the connector
The wire harness between the MOTOR and PWB ASSEMBLY
(Main) is cut (open circuited).
The hall sensor is out of order/defective

ERROR = POWER FAILURE
SYMTOM = PF
CAUSE = The washer experienced a power failure

For Service Manual download here
Kindly Bookmark this Post using your favorite Bookmarking service: