Kenmore ELITE Washing Machine Error Code

Kenmore ELITE Washing Machine Error Code MODEL : 796.2927#0##

TROUBLE SHOOTING METHODS ACCORDING TO ERROR MESSAGE

ERROR = WATER SUPPLY
ERROR DECISION BASIS = WATER LEVEL dose not rise to the set level in within 30 minutes.
NO INLET lamp blinks
CAUSE FOR ERROR OCCURRENCE = Water faucet is closed?
Water supply is interrupted.
Inlet V/V is clogged with dirts.
Connector has bad contact to the inlet valve.
BLUE 6-pin connector has a bad connection at the main board.
REMEDY = Open water faucet. Wait until water supply is resumed.
Clean or replace filter.
Correct the connector contact.
Same as above

ERROR = DRAINAGE
ERROR DECISION BASIS = Water is not completely within 12 minutes. (0E)
CAUSE FOR ERROR OCCURRENCE = Is the drain hose located properly?
Drain hose is folded or clogged due to freeze or dirt.
Defective drain pump or the BLUE 3-pin connector to the main board has a bad connection.
REMEDY = Drain hose properly positioned at 0.9 ~ 1.2 m (36 ~ 48 inches) above the floor.
Make sure the drain hose is not plugged with a foreign object.
Check drain pump motor contact. Replace the pump if necessary.

ERROR = UNBALANCE
ERROR DECISION BASIS = Laundry unbalance during spin. (UE)
CAUSE FOR ERROR OCCURRENCE = Laundry in the INNER TUB is filled unevenly.
Washer is tilted.
REMEDY = Load the washer as evenly as possible.
Adjust the leg.

ERROR = LID OPEN
ERROR DECISION BASIS = LID is opened in the course of intermittent spin,
normal spin or processing reservation. (dE)
CAUSE FOR ERROR OCCURRENCE = Lid is opened during intermittent spin or normal spin?
Lid is opened while processing reservation?
Check the connections to the lid switch and at the WHITE 6-pin connector at the main board.
REMEDY = Close the lid.
Close the lid.
Check the connections.
If the connection is good, check the lead wire and replace it if necessary.

ERROR = PRESSURE SENSOR
ERROR DECISION BASIS = Pressure switch has a bad connection or the switch has failed. (PE)
CAUSE FOR ERROR OCCURRENCE = Check the connections at the pressure switch and at the BLUE 4-pin connector at the main board.
Test the pressure switch in TEST MODE. If the initial reading is less than 60 or more than 104, the switch has failed and must be replaced
REMEDY = Reseat the connector.
Replace the switch.

ERROR = OVER FLOW ERROR
ERROR DECISION BASIS = FE
CAUSE FOR ERROR OCCURRENCE = Check the valves to be sure there is no input leakage. Then check the drain hose and make sure the drain pipe is between 0.9 ~ 1.2 m (36 and 48 inches) above the floor.
Check for blockages and leaks in the air hose between the tub and the pressure switch.
Check and repair any air leakages at the air hose connector on the outer tub and
at any connecting parts.
REMEDY = Install the drain hose between 0.9 ~ 1.2 m (36 and 48 inches) above the floor.
Replace pressure sensor switch
Remove the foreign objects in pressure sensor switch air hose.

ERROR = MOTOR ERROR
ERROR DECISION BASIS = LE
CAUSE FOR ERROR OCCURRENCE = Check the connections at the hall sensor and at the WHITE 6-pin connector on the main board.
Check the connections at the stator and at the yellow 3-pin or WHITE 6-pin connector on the main board. Test the stator to determine it is not defective.
Test hall sensor to determine it is not defective.
Turn the drum to verify the bearings are not locked.
REMEDY = Replace the stator if necessary.
Replace the hall sensor if necessary.
Replace the bearings if necessary.

Service manual please download here
View

Read More ->>

LG Washing Machine Service Manual

LG WASHING MACHINE SERVICE MANUAL
MODEL : WM2411HW/WM2011H*/WM1811CW
WM2432HW/WM2032H*/WM1832CW
WM0532HW/WD-10210BD/WD-12210(5)BD
WM2444H*M/WM2442H*/WM2042CW
WM0642H*
Download here
View

LG Washing machine owner manual model WD-3243RHD WD-3245RHD

Contents
Important Safety Information
Specification
Installation
Preparation Before Washing
Adding Detergent
Cycles
How To Use Sasher
Maintenance
Troubleshooting Guide
Warranty
Download here
View

LG WASHING MACHINE SERVICE MANUAL
MODEL : WD(M)-65130F
WD(M)-80130F
WD(M)-10130(5)F
WD(M)-10131F

Contents
1. SPECIFICATION
2. FEATURES & TECHNICAL EXPLANATION
3. PARTS IDENTIFICATION
4. INSTALLATION
5. OPERATION
6. WIRING DIAGRAM/PROGRAM CHART
7. TROUBLESHOOTING
7-1.BEFORE PERFORMING SERVICE
7-2.TEST MODE
7-3.ERROR DISPLAY
8. ERROR DIAGNOSIS AND CHECK LIST
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING
9. DISASSEMBLY INSTRUCTIONS
10. EXPLODED VIEW
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY
10-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY
10-3. THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
APPENDIX (Replacement parts list)
Download here

LG WASHING MACHINE SERVICE MANUAL
MODEL : WD-1***(0~9)ND(K)/TD(K)/FD(K)
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE
CORRECTLY BEFORE OFFERING SERVICE

Contents
1. SPECIFICATIONS
2. FEATURES & TECHNICAL EXPLANATION
3. PARTS IDENTIFICATION
4. INSTALLATION
5. OPERATION
6. WIRING DIAGRAM/PROGRAM CHART
7. TROUBLESHOOTING
7-1.BEFORE SERVICE
7-2.TEST MODE
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
7-4.ERROR DISPLAY
8. ERROR DIAGNOSIS AND CHECK LIST
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING
9. DISASSEMBLY INSTRUCTIONS
10. EXPLODED VIEW
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY
10-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY
10-3. THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
*APPENDIX (Replacement parts list)
Download here
View

Owner's Manual
WM2432HW
WM2032HS
WM2032HW
WM1832CW
Please read this manual carefully. It provides
instructions on safe installation, use, and maintenance.
Retain it for future reference.
Record the model and serial numbers of your machine
and report this information to your dealer if your machine
requires service.

Contents
Important Safety Information
Specifications
Installation Instructions
Preparation Before Washing
Using the Dispenser
Cycles
How to Use the Washer
Maintenance
Troubleshooting Guide
Warranty
Download here

LG Washing Machine
OWNER’S MANUAL
Model WM3431H* WM3434H*

Contents
Important Safety Information
Specification
Installation
Preparation Before Washing
Adding detergent
Cycles
How to Use Washer
Maintenance
Troubleshooting Guide
Warranty
Download here
View

LG Washing Machine
OWNER'S MANUAL
WD13020D
WD12020D
WD11020D
Download here
View

LG Washing Machine
OWNER'S MANUAL
WD(M)-12270RD
WD(M)-12275RD
Download here
View

LG Washing Machine
OWNER'S MANUAL
WM3431H*
WM3434H*
Download here
View

LG Washing Machine Service Manual
MODEL : WD-1247RD / WD-1248RD
Download here

LG Washing Machine
OWNER’S MANUAL
WD(M)-10160(5)F
WD(M)-80160F
WD(M)-65160F
Download here
View

LG WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES
CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-1409RD(1~9)/WDP1103RD(1~9)/WM3455H*
Download here

LG WASHING MACHINE F1443KDS(1~9) OWNER'S MANUAL
Table of Contents
Product features
Warnings
Important safety instructions
Save these instructions
Specifications
Installation
Removing packing
Removing transit bolts
Installation place requirements
Connecting water supply hose
Installation of drain hose
Leveling
How to use washer
Operating washing machine
Care before washing
Washing program table
Extra options
Operating data
Control panel
Additional program
- Time Delay
- Steam Wash
- Favorite
- Pre Wash
Options
- Options
- Rinse
- Temp.
Other functions
- Rinse + Spin
- Spin Only
- Refresh Cycle
Child Lock
Beep On/Off
Tub Clean
Door Lock & Detecting
Adding detergent
Adding detergent and fabric softener
Maintenance
The water inlet filter
The drain pump filter
Dispenser drawer
The washing drum
Cleaning your washer
Cold conditions
Trouble shooting guide
Diagnosing problems
Error messages
Terms of warranty
Download here

OWNER’S MANUAL WASHING MACHINE WM2350H*C

Table of Contents
I N T RO D U C T I O N
IMPORTANT SAFETY INSTRUCTIONS
Basic Safety Precautions
Grounding Instructions
Safety Instructions for Installation
Safety Instructions for Use, Care and Cleaning, and and Disposal
PARTS AND FEATURES
Special Features
Key Parts and Components
INSTALLATION INSTRUCTIONS
Choose the Proper Location
Clearances
Flooring
Installations with Optional Pedestal Base or Stacking Kit
Unpacking and Removing Shipping Bolts
Connecting the Water Lines
Connecting the Drain Line
Leveling the Washer
Installation of Non-skid pads (Optional)
HOW TO USE
Control Panel Features
Operating the Washer
Cycle Guide
Sorting Wash Loads
Selecting detergent
About the Dispenser
Loading the Dispenser
The Time And Status Display
Cycle Setting Buttons
Custom Program
Load Size Sensing System
Cycle Option Buttons
Special Functions
Special Care Cycles
COLDWASH™ Cycles
CARE AND CLEANING
Regular Cleaning
Cleaning the Washer
Maintenance
TROUBLESHOOTING
Normal Sounds You May Hear
Before Calling for Service
Using SmartDiagnosis™
SPECIFICATIONS/OPTIONAL ACCESSORIES
Key Dimensions and Specifications
Optional Accessories
WARRANTY
Download here

LG WASHING MACHINE SERVICE MANUAL
MODEL: WM2277H*/WM2077CW
WM2177H*/WM2677H*M
WD-11270BD
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.

CONTENTS

1. SPECIFICATIONS
2. FEATURES & TECHNICAL EXPLANATION
3. PARTS IDENTIFICATION
4. INSTALLATION & TEST
5. OPERATION
6. WIRING DIAGRAM/PROGRAM CHART
7. TROUBLESHOOTING
7-1. BEFORE PERFORMING SERVICE
7-2. QC TEST MODE
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
7-4. ERROR DISPLAY
8. ERROR DIAGNOSIS AND CHECK LIST
8-1. DIAGNOSIS AND SOLUTION FOR ABNORMAL OPERATION
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING
9. DISASSEMBLY INSTRUCTIONS
10. EXPLODED VIEW
10-1. CABINET & CONTROL PANEL ASSEMBLY
10-2. DRUM & TUB ASSEMBLY
10-3. DISPENSER ASSEMBLY
Download here or View

LG WASHING MACHINE SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE CORRECTLY BEFORE OFFERING SERVICE.
MODEL :
WD-803(4)0(W)(F)(H)
WD-803(4)0F(H)(B)
WD-1042F(H)(B)
WD-1041(3)F(H)(B)
WD-102(4)1(5)W(F)(H)
WD-102(4)(5)F(H)(B)
WD-1223(5)F(H)(B)
WD-1243(5)F(H)(B)

CONTENTS

1. SPECIFICATION
2. FEATURES & TECHNICAL EXPLANATION
3. PARTS IDENTIFICATION
4. INSTALLATION
5. OPERATION
6. WIRING DIAGRAM
7. PROGRAM CHART
8. TROUBLESHOOTING
8-1. BEFORE PERFORMING SVICE
8-2. QC TEST MODE
8-3. HOW TO KNOW THE WATER LEVEL FREQUENCY
8-4. ERROR DISPLAY
9. ERROR DIAGNOSIS AND CHECK LIST
9-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
9-2. FAULT DIAGNOSIS AND TROUBLESHOOTING
10. DISASSEMBLY INSTRUCTIONS
11. EXPLODED VIEW AND PART LIST
11-1. THE EXPLODED VIEW OF CABINET ASSEMBLY
11-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY
11-3. THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
APPENDIX(Replacement parts list)
Download here or View

LG COMBO Service Manual
CONTENTS
DETERMINE WASHING TIME BY FUZZY LOGIC
WATER LEVEL CONTROL
CONTROL OF DOOR OPEN
INSTALLATION
Download Here or View

LG WASHING MACHINE SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.
MODEL: WM1812CW/WM1814CW/WD-90286BD

CONTENTS
1. SPECIFICATIONS
2. FEATURES & TECHNICAL EXPLANATION
3. PARTS IDENTIFICATION
4. INSTALLATION & TEST
5. OPERATION
6. WIRING DIAGRAM/PROGRAM CHART
7. TROUBLESHOOTING
7-1. BEFORE PERFORMING SERVICE
7-2. QC TEST MODE
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
7-4. ERROR DISPLAY
8. ERROR DIAGNOSIS AND CHECK LIST
8-1. DIAGNOSIS AND SOLUTION FOR ABNORMAL OPERATION
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING
9. DISASSEMBLY INSTRUCTIONS
10. EXPLODED VIEW
10-1. CABINET & CONTROL PANEL ASSEMBLY
10-2. DRUM & TUB ASSEMBLY
10-3. DISPENSER ASSEMBLY
Download here

LG WASHING MACHINE
SERVICE MANUAL
MODEL: WM3885H*CA / WM3875H*CA

CONTENTS
1. Specifications
2. Features and Technical Explanation
3. Parts Identification
4. Installation and Test
5. Operation
5-1. Control Panel Features
5-2. Cycle Guide
5-3. Special Functions
5-4. Explanation of Each Process
6. Wiring Diagram / Program Chart
7. Test Mode
7-1. Safety Caution
7-2. Load Test Mode
7-3. How To Read the Display in Load Test Mode
7-4. How To Check the Water Level Frequency and Vibration Sensor Error
8. Troubleshooting
8-1. Safety Caution
8-2. Error Mode Summary
8-3. Troubleshooting Summary
8-4. Troubleshooting With Error
8-5. Troubleshooting Else
9. Component Testing Information
9-1. Filter Assembly (Line Filter)
9-2. Door Look Switch Assembly
9-3. Stator Assembly
9-4. Pump Motor Assembly
9-5. Inlet Valve Assembly
9-6. Heater Assembly
9-7. Thermistor Assembly
9-8. Steam Generator Assembly
9-9. Lamp
9-10. Vibration sensor assembly
10. Disassembly Instructions
11. Exploded View
11-1. Cabinet and Control Panel Assembly
11-2. Drum and Tub Assembly
11-3. Dispenser Assembly
Download here  
or View

LG WASHING MACHINE
SERVICE MANUAL
MODELS: WF-T857

CONTENTS
Specifications
2. Installation Instructions
3. Operating Instructions
3-1. Identification of Parts
3-2. Before Starting to Wash
3-3. Function of Each Button
3-4. Washing Programs
3-5. Other Functions
3-6. Care and Maintenance
4. Service Information
4-1. Schematic Diagram
4-2. Wiring Diagram
4-3. Program Time Chart
4-4. Adjustmen
4-5. Disassembly Instruction
4-6. Test Running without water
4-7. Trouble Shooting against Common Washing Problems
4-8. Trouble Shooting According to Error Message
4-9. How to Diagnose and Repair by Symptom
5. Exploded View
6. Replacement Part List
Download here or View

LG WASHING MACHINE
SERVICE MANUAL
MODELS : WT-H800 / WT-H950
CONTENTS
1. Specifications
2. Installation Instructions
3. Operating Instructions
3-1. Identification of Parts
3-2. Before Starting to Wash
3-3. Function of Each Button
3-4. Washing Programs
3-5. Other Functions
3-6. Care and Maintenance
4. Service Information
4-1. Schematic Diagram
4-2. Wiring Diagram
4-3. Program Time Chart
4-4. Adjustmen
4-5. Disassembly Instruction
4-6. Test Running without water
4-7. Trouble Shooting against Common Washing Problems
4-8. Trouble Shooting According to Error Message
4-9. How to Diagnose and Repair by Symptom
5. Exploded View
6. Replacement Part List
Download here

LG WASHING MACHINE
SERVICE MANUAL
MODEL : WF-T851 / T852 / T853 / T802 / T902
WF-T652(T652A) / T452(T452A) / 402
Contents
11. SPECIFICATIONS
12. FEATURES & TECHNICAL EXPLANATION
13. PART IDENTIFICATION
14. INSTALLATION INSTRUCTION
15. SCHEMATIC DIAGRAM
16.OPERATING INSTRUCTION
7.PROGRAM CHART
18. TEST RUNNING WITHOUT WATER
09. ADJUSTMENT
10. DISASSEMBLY INSTRUCTION
11.TROUBLE SHOOTING METHODS ACCORDING TO ERROR MESSAGE
12. HOW TO DIAGNOSE AND REPAIR BY SYMPTOM
13. EXPLODED VIEW
14. RPL
Download here

LG WASHING MACHINE
SERVICE MANUAL
MODEL :
GCW1069QS
GCW1069CS
Contents
1.IMPORTANT SAFETY INSTRUCTIONS
2.SPECIFICATIONS
3.FEATURES AND TECHNICAL EXPLANATION
4.PARTS IDENTIFICATION
5.INSTALLATION INSTRUCTIONS
6.OPERATION
7.WIRING DIAGRAM/PROGRAM CHART
8.TROUBLESHOOTING
8-1. BEFORE PERFORMING SERVICE
8-2. QC TEST MODE
8-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
8-4. HOW TO CHECK THE RPM
8-5. ERROR DISPLAY
8-6. DISPENSER
9. DIAGNOSIS AND TROUBLESHOOTING
10. DISASSEMBLY INSTRUCTIONS
11. EXPLODED VIEW
11-1-1. CABINET & CONTROL PANEL ASSEMBLY - COIN TYPE
11-1-2. CABINET & CONTROL PANEL ASSEMBLY - CARD TYPE
11-2. DRUM & TUB ASSEMBLY
11-3. DISPENSER ASSEMBLY
Download here or View

LG WASHING MACHINE
SERVICE MANUAL
MODEL : WT-R857
WT-R807
Contents
1. Specifications
2. Installation Instructions
3. Operating Instructions
3-1. Identification of Parts
3-2. Before Starting to Wash
3-3. Function of Each Button
3-4. Washing Programs
3-5. Other Functions
3-6. Care and Maintenance
4. Service Information
4-1. Schematic Diagram
4-2. Wiring Diagram
4-3. Program Time Chart
4-4. Disassembly Instruction
4-5. Test Running without water
4-6. Trouble Shooting Methods against Common Washing Problems
4-7. Trouble Shooting Methods according to Error Message
4-8. How to Diagnose and Repair by Symptom
5. Exploded View
6. Replacement Part List
Download here

Read More ->>

Samsung Washing Machine WF-338* Error Code

INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Washer.

CODE SYMBOL = dc
MEANING = Unbalanced load prevented your Washer from spinning.
SOLUTION = Redistribute the load, press the Start/Pause Button.

CODE SYMBOL = dL
MEANING = Door is unlocked when Washer is running.
SOLUTION = Press the Power button to turn off your Washer, then restart the cycle. If the code reappears, call for service.

CODE SYMBOL = d5
MEANING = Door is open when Washer is running.
SOLUTION = Close the door tightly and restart the cycle. If the code reappears, call for service.

CODE SYMBOL = FL
MEANING = Your Washer failed to lock the door.
SOLUTION = Close the door tightly and restart the cycle. If the code reappears, call for service.

CODE SYMBOL = Hr
MEANING = Water temperature control problem. (Heater Control problem)
SOLUTION = Call for service.

CODE SYMBOL = LE
MEANING = Your Washer has tried to fill but has not reached the proper water level.
SOLUTION = Call for service.

CODE SYMBOL = L0
MEANING = The door will not unlock.
SOLUTION = Make sure the door is firmly closed. Push the Power button to turn off your Washer, then turn it on again. If the code reappears, call for service.

CODE SYMBOL = E3
MEANING = Motor not running properly.
SOLUTION = Restart the cycle pressing the Start/Pause Button. If the code reappears, call for service.

CODE SYMBOL = nd
MEANING = Your washer is not draining. It can also mean that the unit senses a small clog while draining.
SOLUTION = Before calling for service, check the following.
1. Clean the filter. (see page 19)
or
1. Turn off the unit for 10 seconds and then turn it on again.
2. Select only the Spin Cycle.
3. Press the Start/Pause to drain the water. If it still does not drain, call for service.

CODE SYMBOL = nF
MEANING = Your Washer has tried to fill but was unsuccessful.
SOLUTION = Make sure the water faucets are open all theway. Check for kinked hoses.
Check the inlet screens on the fill hoses.

CODE SYMBOL = 5r
MEANING = Problem with control.
SOLUTION = Call for service.

CODE SYMBOL = PF
MEANING = Electric service was lost when Washer was running.
SOLUTION = Restart the cycle by pressing the Start/Pause Button.

CODE SYMBOL = 0E
MEANING = A fault is detected in the water level sensor.
SOLUTION = Call for service

CODE SYMBOL = E2
MEANING = Jammed Key.
SOLUTION = Call for service

CODE SYMBOL = bE
MEANING = Motor speed sensor problem.
SOLUTION = Restart the cycle. If the code reappears, call for service.

CODE SYMBOL = tE
MEANING = Temperature sensor problem.
SOLUTION = Restart the cycle. If the code reappears, call for service.

CODE SYMBOL = 3E
MEANING = High current detected.
SOLUTION = Restart the cycle. If the code reappears, call for service.

CODE SYMBOL = 2E
MEANING = High/Low voltage detected.
SOLUTION = Restart the cycle. If the code reappears, call for service.

CODE SYMBOL = 5Ud5
MEANING = Too many suds are detected during the washing session.
The unit is put on hold until the suds are reduced. Then, the unit will go back to the operation.
When it finishes washing, End and SUdS codes will blink in turn
SOLUTION = To prevent it, cut down on detergents.

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
Service Manual download here

Read More ->>

LG Washing Machine WM2411HW Error Code

MODEL : WM2411HW/WM2011H*/WM1811CW
WM2432HW/WM2032H*/WM1832CW
WM0532HW/WD-10210BD/WD-12210(5)BD
WM2444H*M/WM2442H*/WM2042CW
WM0642H*

If you press the START/PAUSE button when an error is displayed, any error except "PE" will disappear and the machine will go into the pause status.
In case of " PE, tE, dE " if the error is not resolved within 20 sec., or the in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error code will blink. But in the case of "FE", power will not be turned off.

ERROR = WATER INLET ERROR
SYMTOM = I E
CAUSE = • Correct water level (2 level) is not reached within 8 minutes after water is supplied or it does not reach the preset water level within 25 minutes.

ERROR = IMBALANCE ERROR
SYMTOM = U E
CAUSE = • The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.

ERROR = DRAIN ERROR
SYMTOM = 0 E
CAUSE = • Not fully drained within 10 minutes.

ERROR = OVER FLOW ERROR
SYMTOM = F E
CAUSE = • Water is overflowing (over 8 level).
¡ If "F E" is displayed, the drain pump will operate to the drain water automatically.

ERROR = PRESSURE SENSOR ERROR
SYMTOM = P E
CAUSE = • The SENSOR SWITCH ASSEMBLY is out of order.

ERROR = DOOR OPEN ERROR
SYMTOM = d E
CAUSE = • Door not all the way closed.
• Loose electrical connections at Door switch and
PWB Assembly.
• The DOOR SWITCH ASSEMBLY is out of order.

ERROR = HEATING ERROR
SYMTOM = t E
CAUSE = • The THERMISTOR is out order.

ERROR = OVER CURRENT ERROR
SYMTOM = C E
CAUSE = • MAIN PWB ASSEMBLY is out of order.
• Winding in the STATOR ASSEMBLY is short-circuited.

ERROR = LOCKED MOTOR ERROR
SYMTOM = L E
CAUSE = • The connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector
(3-pin, female, white) of STATOR ASSEMBLY.
• The electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS
and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuited).
• The hall sensor is out of order/defective.

ERROR = BALL SENSOR ERROR
SYMTOM = b E
CAUSE = • Loose Ball Sensor Connector.
• Ball Sensor is out of order.
¡ Displayed only when the START / PAUSE button is first pressed in the QC Test Mode.

ERROR = EEPROM ERROR
SYMTOM = E E
CAUSE = • EEPROM is out of order.
¡ Displayed only when the START / PAUSE button is first pressed in the QC Test Mode.

ERROR = POWER FAILURE
SYMTOM = P F
CAUSE = • The washer experienced a power failure.

Read More ->>

Whirlpool Duet Front Loading Automatic Washer Fault Codes

Failure Code = FH
Fault Code Description = No water detected entering machine or pressure switch trip not detected
Solution = If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed.
Or
If the control has turned the water valves on and after 8 minutes the flow meter has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash.
Press PAUSE/CANCEL twice to clear the display.
Potential Causes
• If there is no water in the unit: - Make sure that both valves at the water source(s) are turned on all the way.
- Check for plugged or kinked inlet hoses or plugged screens in the inlet valves
- Verify inlet valve operation
• If there is water in the unit:
- Verify Drain pump operation
- Pressure Switch Hose is in good condition and properly connected to Tub and Pressure switch
• Verify there is not a siphon problem
• Verify wire harness connections to; Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
• Check all hoses for possible leaks
• Verify pressure switch operation
• Verify flow meter operation
• Verify CCU operation Replace failed component

Failure Code = F02
Fault Code Description = Long Drain
Solution = If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed. Press PAUSE/CANCEL twice to clear the display.
NOTE: After 4 minutes the “Sud” error will be displayed,
then 4 minutes later the F02 error code will be displayed.
Potential Causes
• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Failure Code = F05
Fault Code Description = Water temperature sensor error
Solution = If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, or the heating element circuit has failed, the F05 error code will be displayed.
Potential Causes
• Check the Water Temperature Sensor, Heating Element and Element Relay
• Check connections to the Sensor, Heating Element and Relay Replace failed component

Failure Code = F06
Fault Code Description = Drive motor tachometer error
Solution = The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.
Potential Causes
• Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU)
• Check the Drive Motor
• Check the MCU
• Check the Wire Harness Replace failed component.

Failure Code = F07
Fault Code Description = Motor control unit error
Solution = The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.
Potential Causes
• Check wire harness connections between the Drive Motor and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
• Check the MCU
• Check the Drive Motor
• Check the Wire Harness Replace failed component.

Failure Code = F09
Fault Code Description = Overflow condition
Solution = If the Overflow contact on the pressure switch is Closed for more than 60 seconds an Overflow condition will occur. In an Overflow condition, the Door will remain locked, and the Drain Pump will run constantly, even if PAUSE/CANCEL is pressed twice and the Display is cleared. Unplug the unit to service.
Potential Causes
• Check the drain hose and make sure it is not plugged or kinked
• Check Wire Harness connections to the Drain Pump, Pressure Switch, and Central Control Unit (CCU)
• Check / Clean Drain Pump Filter of foreign objects
• Check for Drain Pump Failure
• Check the Inlet Valve for proper shut off
• Check the Pressure switch for proper operation Replace failed component.

Failure Code = F10
Fault Code Description = Motor Control Unit (MCU) heat sink thermal trip
Solution = If the thermal protector on the MCU heat sink gets too hot, it will open the thermal protector on the heat sink which will stop motor functions and an F10 will be displayed.
Potential Causes
• Check for Proper Installation, verify the unit is not located near a source of heat and has proper ventilation.
• Check Wire Harness connections to the MCU, the motor, and Central Control Unit (CCU)
• Check the Drive system for any worn or failed components
• Check MCU
• Check Motor Replace failed component.

Failure Code = F11
Fault Code Description = Serial communication error
Solution = Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
Potential Causes
• Check Wire Harness connections to the MCU, the motor, and Central Control Unit (CCU)
• Check the Drive system for any worn or failed components
• Check MCU
• Check CCU
• Check Motor
• Check Wire Harness Replace failed component.


Failure Code = F13
Fault Code Description = Dispenser circuit error
Solution = If the dispenser motor is not able to be driven to it’s proper position.
Potential Causes
• Check mechanical linkage from dispenser motor to the top of the dispenser.
• Check Wire Harness connections to the dispenser motor and Central Control Unit (CCU)
• Check Dispenser Motor Replace failed component.


Failure Code = F14
Fault Code Description = EEPROM error
Solution = The Central Control Unit (CCU) receives it’s data from an EEPROM onboard the CCU.
If there is an error reading this data it will cause this error.
Potential Causes
• A power glitch may cause this error. Try unplugging the Unit for two minutes to see if that fixes the error.
• Check CCU. Replace failed component.

Failure Code = F15
Fault Code Description = Motor Control Unit (MCU) error
Solution = If the MCU detects multiple resets or errors during a wash cycle it will go into this error mode. Potential Causes
• Check Wire Harness connections to the MCU, the motor, and Central Control Unit (CCU)
• Check Drive belt
• Check MCU
• Check Motor
• Check Wire Harness Replace failed component

Failure Code = Sud
Fault Code Description = SUDS LOCK (Overdose of detergent detected during the wash cycle)
Solution = The motor control unit senses a suds lock condition by analyzing the current draw on the drive motor. If “Sud” is displayed a potential suds lock is detected. This may signify a bad pump, an extra heavy load, excessive detergent, or excessive suds.
Potential Causes
• If too much detergent was used, run the unit through a Rinse/ Spin cycle then a Normal cycle without adding any detergent. This should clear the unit of the excess detergent.
• Check the drain hose and make sure it is not plugged or kinked
• Check Wire Harness connections to the Drain Pump, Pressure Switch, and Central Control Unit (CCU)
• Check / Clean Drain Pump Filter of foreign objects
• Check Drain Pump • Check the Pressure Switch
• Check CCU Replace failed component

Failure Code = FdL
Fault Code Description = Door lock error
Solution = A Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times before displaying the error.
Potential Causes
• Door Lock Mechanism broken or removed from the Door
• Check Door Lock/Switch Assembly
• Check the wire harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU)
• Door Lock/Switch Assembly Failure Replace failed component

Failure Code = FdU
Fault Code Description = Door unlock error
Solution = A Door Unlock Error occurs if the door cannot be unlocked. It will try to unlock the door 6 times before displaying the error.
Potential Causes
• Door Lock Mechanism broken.
• Check Door Lock/Switch Assembly for foreign objects
• Check Wire Harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU)
• Door Lock/Switch Assembly Failure Replace failed component.
Note: The door lock/switch assembly can be manually unlocked.
To Manually unlock the door lock system:
1. Unplug the power cord from the outlet.
2. Remove the lower toe panel.
3. Reach up along the inside of the front panel and locate the bottom of the door latch assembly.
4. Located on the bottom of the door latch assembly is a tear-drop shaped tab.
5. Gently pull the tab down about 1/4 inch or until a click is heard. 6. The door may now be opened.

Read More ->>