If you press the START/PAUSE button when an error is displayed, any error except "PE" will disappear and the machine will go into the pause status.
In case of " PE, tE, dE " if the error is not resolved within 20 sec., or the in case of other errors, if the error is not resolved within 4 min., power will be turned off automatically and the error code will blink. But in the case of "FE" power will not be turned off.
ERROR = WATER INLET ERROR
SYMPTOM = IE
CAUSE = Correct water level (246) is not reached within 8 minutes after water is supplied or it does not reach the preset water level within 25 minutes
ERROR = IMBALANCE ERROR
SYMPTOM = UE
CAUSE = The load is too small
The appliance is tilted
Laundry is gathered to one side
Non distributable things are put into the drum
ERROR = DRAIN ERROR
SYMPTOM = 0E
CAUSE = Not fully darained within 10 minutes
ERROR = OVER FLOW ERROR
SYMPTOM = FE
CAUSE = Water is overflowing (water level frequency is over 213)
If "FE" is displayed, the drain pump will operate to drain the water automatically
ERROR = PRESSURE SENSOR ERROR
SYMPTOM = PE
CAUSE = The SENSOR SWITCH ASSEMBLY is out of order
ERROR = DOOR OPEN ERROR
SYMPTOM = dE
CAUSE = Loose electrical connections at door switch and PWB assembly
The DOOR SWITCH ASSEMBLY is out order
ERROR = HEATING ERROR
SYMPTOM = tE
CAUSE = The THERMISTOR is out order
0 komentar:
Post a Comment