Model: DWD-FD1411/1412/1413
DWD-FD1421/1422/1423
DWD-FD1431/1432/1433
Message = IE
Error = WATER INLET ERROR
Cause & Solution =
The water tap is closed. Open the water tap.
The filter of the valve inlet is clogged. Clean the filter of the valve inlet.
The valve inlet is an inferior product or broke down. Change the valve inlet.
The water level sensor (sensor pressure) is an inferior product Change the water level sensor
or broke down. (sensor pressure).
The drain motor works during water supply. Change the drain motor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
Message = OE
Error = DRAIN ERROR
Cause & Solution =
The drain hose is kinked or clogged. Clean and straighten the drain hose.
The drain motor is an inferior product. Change the drain motor.
The valve inlet works during drain. Change the valve inlet
The water level sensor is an inferior product. Change the water level sensor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The RPM of drum did not reach the setting RPM Clean the drain pump filter.
within the setting time during the spin. Or restart spin only course
Message = UE
Error = UNBALANCE ERROR
Cause & Solution = The laundry is concentrated to one side of the drum during spin. Rearrange the laundry.
Message = LE
Error = DOOR OPEN ERROR
Cause & Solution =
The Start/Hold button is pressed while the door is opened. Close the door.
The switch door lock is an inferior product. Change the switch door lock.
The PCB ASS’Y does not check the door lock. Change the PCB ASS’Y.
Message = E2
Error = OVERFLOW ERROR
Cause & Solution =
The water is supplied continuously due to an inferior valve inlet. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
(sensor pressure) is inferior. (sensor pressure).
The drain motor dose not work. (The drain motor is an inferior product or broke down.) Change the drain motor.
Message = E4
Error = LEAKAGE ERROR
Cause & Solution = Water leaks from the tub or the hose drain. Check the leak of the tub or the hose drain. Then change the tub or the hose drain.
Message = E5
Error = HIGH VOLTAGE ERROR
Cause & Solution =
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
Message = E6
Error = EMG ERROR
Cause & Solution =
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The motor is an inferior product. Change the motor.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
Message = E7
Error = DIRECTION ERROR
Cause & Solution =
The motor spins into an opposite direction. Change the PCB ASS or the motor.
The motor hall IC is an inferior product or broke down. Change the motor hall IC or the motor.
Message = E8
Error = MOTOR ERROR
Cause & Solution =
The motor is not normally connected. Check the connector of the motor.
The motor does not work. (The motor is an inferior product or broke down.) Change the motor.
Message = E9
Error = SENSOR PRESSURE ERROR
Cause & Solution = The water level sensor is an inferior product. Change the water level sensor.
Message = H2
Error = THERMISTOR WASH ERROR
Cause & Solution =
The thermistor wash is an inferior product or broke down. Change the thermistor wash.
The thermistor wash is not connected normally. Check the connector of the thermistor wash.
Message = H4
Error = THERMISTOR WASH OVERHEATING ERROR
Cause & Solution =
The heater worked without the water in the tub. Check the water level.
The thermistor wash is an inferior product or broke down. Change the thermistor wash.
Message = H5
Error = WATER TEMP ERROR
Cause & Solution =
The water temp. is over 45°C in delicate & wool course.(The thermistor wash is an inferior product or broke down.) Change the thermistor wash.
Message = H6
Error = HEATER WASH ERROR
Cause & Solution =
The heater wash dose not work. (The water temp. doesn't rise over 2°C during 15min.) Change the heater wash.
Message = H8
Error = HEATER WASH OVERHEATING ERROR
Cause & Solution =
The heater worked without the water in the tub. Check the water level and the heater wash.
Message = PFE
Error = PUMP FILTER ERROR
Cause & Solution =
The drain pump filter is clogged. Clean the drain pump filter.
The drain pump does not work during spin. Change the drain pump.
The large amount of detergent was used. Use the proper amount of detergent.
The drain hose is placed higher than 1m above the floor. Place the drain hose 1m below the floor
Service Manual please download here
9 komentar:
I have a massage E3
What that means
Thanks
Thanks for the post. Blogs like these are very useful for people who are into home appliance service. Our washing machine service centers has benefited from this post. Thanks.
Excellent post. Was searching all over the net for a service issue and finally landed on this post and it was very helpful. We run a washing machine service center so was very helpful for us.
Hi James. Very informative post. Posts like these are very useful and particularly for people who are running washing machine service center. Thanks.
H7 ERROR
I have massage F1
WHAT THE MEAN..
TQ
Hello i have massage F1 what the mean
Plz reply me fast
Did you receive a response to this message or a solution to it?
Good post for both consumer and technician. In fully automatic washing machine water overflow is an issue. First thing to do is to check if the water runs even if the machine is stopped. If yes then inlet valve might be the problem. If not then would have to check the machine through a technician. Worked in samsung service center in Chennai for years and know that this is a very common issue.
Post a Comment